Wood Buffalo: air quality for the completed day
2 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 17:00–17:00 UTC-7): 2 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Canada · The summary is refreshed every 15 minutes.
6 µg/m³ Low
November 19
The air is clean now
Measured 09:00
Wood Buffalo
-3°C
Cloudy
1014
hPaAtmospheric
pressure
80%
Humidity
Wood Buffalo, November 18, 2026: daily mean PM2.5 2 µg/m³ (5 sensors), level “Low” — as in the Atmy Data Hub. Now (11:00 local time): 6.2 µg/m³. Open methodology and data in JSON: Methodology and data sources · JSON
Right now in Wood Buffalo, PM2.5 averages 6.2 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 5 sensors from Government stations, readings from 09:00–09:00 local time (16:00–16:00 UTC), summary prepared at 11:00 local time. Median: 6.0 µg/m³; range across sensors: 2.0–13.0 µg/m³.
In Wood Buffalo the air is good 🟢 AQI 34. Lower than three hours ago. ☁️ -3 °C · No precipitation · Wind 4 m/s
In Wood Buffalo the air is good right now (approximate, US EPA scale). From 23:00 to 11:00 local time the city mean PM2.5 rose from 3.0 to 6.2 µg/m³. The highest hour was 07:00 with 9.0 µg/m³.
Cold weather (-3°C) possibly means more heating, a common source of particles.
Weather now: cloudy, -3°C, wind 4 m/s, humidity 80%. By 19:00 the wind is expected to drop to 2 m/s, and particles may build up.
Written automatically at 11:00 local time (18:00 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
4 m/s
Wind, S
0 mm
Precipitation today
2 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 17:00–17:00 UTC-7): 2 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub.
63/100Moderate · An estimate of weather conditions · not a PM2.5 forecast
2°/-4°
Index by time of day
83/100High
-1°/-6°
Index by time of day
59/100Moderate
-6°/-13°
Index by time of day
98/100High
-3°/-12°
Index by time of day
89/100High
-3°/-9°
Index by time of day
88/100High
-4°/-8°
Index by time of day
91/100High
Forecast of conditions that trap pollution near the surface
-3°
Cloudy. Feels like -8°C
4m/sWind from the S
8m/sWind gusts
Wind force: 3
Gusts up to 9 m/s are expected.
Canada
Highest current reading: 13.0 µg/m³ (Syncrude UE1 (Alberta Environmental Monitoring and Reporting Agency (AEMERA))). Lowest: 2.0 µg/m³ (Anzac (Alberta Environmental Monitoring and Reporting Agency (AEMERA))). The list shows every sensor, highest first.
Source: atmy.ai monitoring network
Sensors in the summary by network: Government stations — 5 sensors.
Atmy shows the networks’ readings after the Data Hub’s quality check: test devices and sensors that fail it are left out.
142
CalgaryCanada
11TorontoCanada
10EdmontonCanada
9Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Daily mean PM2.5 of the city sensors, µg/m³
Click a day to see its date and value.
Canada · City ranking · All pilot cities
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 17:00–17:00 UTC-7): 2 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub. No. 9 of 9 cities in Canada and No. 742 of 811 worldwide, from the most polluted.
Right now in Wood Buffalo, PM2.5 averages 6.2 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 5 sensors from Government stations, readings from 09:00–09:00 local time (16:00–16:00 UTC), summary prepared at 11:00 local time. Median: 6.0 µg/m³; range across sensors: 2.0–13.0 µg/m³.
The current level is “good” (US EPA scale, approximate). Air quality is satisfactory; no restrictions are recommended. This is the standard guidance of the scale, not medical advice.
Highest current reading: 13.0 µg/m³ (Syncrude UE1 (Alberta Environmental Monitoring and Reporting Agency (AEMERA))). Lowest: 2.0 µg/m³ (Anzac (Alberta Environmental Monitoring and Reporting Agency (AEMERA))). The list shows every sensor, highest first.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms