Air in cities near St. Albert
- 19 kmEdmonton →8 µg/m³
- 35 kmSherwood Park →6 µg/m³
- 46 kmFort Saskatchewan →4 µg/m³
- 276 kmCalgary →5 µg/m³
- 482 kmWood Buffalo →2 µg/m³
- 695 kmSpokane Valley, United States →11 µg/m³
Canada · The summary is refreshed every 15 minutes.
No current value: fewer than four sensors at different places are reporting now.
Open methodology and data in JSON: Methodology and data sources · JSON
In St. Albert the air is good right now (approximate, US EPA scale). From 23:00 to 09:00 local time the city mean PM2.5 rose from 5.0 to 9.0 µg/m³.
Cold weather (-1°C) possibly means more heating, a common source of particles. High humidity (95%) possibly makes optical sensors read somewhat higher.
Weather now: cloudy, -1°C, wind 3 m/s, humidity 95%. No major change in the wind is expected in the coming hours.
Written automatically at 10:08 local time (17:08 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
3 m/s
Wind, S
0 mm
Precipitation today
49/100Moderate · An estimate of weather conditions · not a PM2.5 forecast
2°/-3°
Index by time of day
79/100High
-3°/-5°
Index by time of day
68/100High
-3°/-4°
Index by time of day
70/100High
-2°/-6°
Index by time of day
60/100Moderate
-3°/-9°
Index by time of day
92/100High
-4°/-11°
Index by time of day
99/100High
Forecast of conditions that trap pollution near the surface
-1°
Cloudy. Feels like -5°C
3m/sWind from the S
7m/sWind gusts
Wind force: 2
Gusts up to 9 m/s are expected.
Canada
142
CalgaryCanada
11TorontoCanada
10EdmontonCanada
9Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Canada · City ranking · All pilot cities
Fresh data for St. Albert are insufficient (last update: 03:56 local time, 10:56 UTC). Open the map for the latest readings of individual sensors.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms