Pullman: air quality for the completed day
6 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 16:00–16:00 UTC-8): 6 µg/m³ from 4 sensors that passed the quality check — the same value as in the Atmy Data Hub.
United States · The summary is refreshed every 15 minutes.
5 µg/m³ Low
November 19
The air is clean now
Measured 09:00–09:48
Pullman
2°C
Cloudy
1012
hPaAtmospheric
pressure
92%
Humidity
Pullman, November 18, 2026: daily mean PM2.5 6 µg/m³ (4 sensors), level “Low” — as in the Atmy Data Hub. Now (10:00 local time): 4.6 µg/m³. Open methodology and data in JSON: Methodology and data sources · JSON
Right now in Pullman, PM2.5 averages 4.6 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 4 sensors from Government stations, AirGradient, readings from 09:00–09:48 local time (17:00–17:48 UTC), summary prepared at 10:00 local time. Median: 4.5 µg/m³; range across sensors: 1.3–8.0 µg/m³.
In Pullman the air is good 🟢 AQI 26. About the same as three hours ago. ☁️ +2 °C · No precipitation · Wind 1 m/s
In Pullman the air is good right now (approximate, US EPA scale). From 21:00 to 10:00 local time the city mean PM2.5 fell from 6.3 to 4.6 µg/m³. The highest hour was 23:00 with 19.8 µg/m³.
The weather data do not point to a clear reason for this level.
Weather now: cloudy, 2°C, wind 1 m/s, humidity 92%. By 18:00 the wind is expected to pick up to 4 m/s, which may clear the air.
Written automatically at 10:00 local time (18:00 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
1 m/s
Wind, NE
0 mm
Precipitation today
6 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 16:00–16:00 UTC-8): 6 µg/m³ from 4 sensors that passed the quality check — the same value as in the Atmy Data Hub.
48/100Moderate · An estimate of weather conditions · not a PM2.5 forecast
6°/2°
Index by time of day
81/100High
4°/1°
Index by time of day
75/100High
5°/0°
Index by time of day
76/100High
2°/-1°
Index by time of day
74/100High
4°/-1°
Index by time of day
69/100High
4°/-1°
Index by time of day
76/100High
Forecast of conditions that trap pollution near the surface
2°
Cloudy. Feels like 0°C
1m/sWind from the NE
2m/sWind gusts
Wind force: 1
Light wind is expected over the next few hours.
United States
Highest current reading: 8.0 µg/m³ (Lacrosse-Hill St (Washington Department of Ecology)). Lowest: 1.3 µg/m³ (Pullman (NW)). The list shows every sensor, highest first.
Source: atmy.ai monitoring network
Sensors in the summary by network: Government stations — 3 sensors, AirGradient — 1 sensor.
Atmy shows the networks’ readings after the Data Hub’s quality check: test devices and sensors that fail it are left out.
534
New YorkUnited States
17SpokaneUnited States
16PortlandUnited States
14Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Daily mean PM2.5 of the city sensors, µg/m³
Click a day to see its date and value.
United States · City ranking · All pilot cities
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 16:00–16:00 UTC-8): 6 µg/m³ from 4 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Right now in Pullman, PM2.5 averages 4.6 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 4 sensors from Government stations, AirGradient, readings from 09:00–09:48 local time (17:00–17:48 UTC), summary prepared at 10:00 local time. Median: 4.5 µg/m³; range across sensors: 1.3–8.0 µg/m³.
The current level is “good” (US EPA scale, approximate). Air quality is satisfactory; no restrictions are recommended. This is the standard guidance of the scale, not medical advice.
Highest current reading: 8.0 µg/m³ (Lacrosse-Hill St (Washington Department of Ecology)). Lowest: 1.3 µg/m³ (Pullman (NW)). The list shows every sensor, highest first.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms