Baltimore: air quality for the completed day
9 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 19:00–19:00 UTC-5): 9 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub.
United States · The summary is refreshed every 15 minutes.
7 µg/m³ Low
November 19
The air is clean now
Measured 12:00–12:48
Baltimore
14°C
Clear
1030
hPaAtmospheric
pressure
44%
Humidity
Baltimore, November 18, 2026: daily mean PM2.5 9 µg/m³ (5 sensors), level “Low” — as in the Atmy Data Hub. Now (13:00 local time): 7.3 µg/m³. Open methodology and data in JSON: Methodology and data sources · JSON
Right now in Baltimore, PM2.5 averages 7.3 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 5 sensors from Government stations, AirGradient, readings from 12:00–12:48 local time (17:00–17:48 UTC), summary prepared at 13:00 local time. Median: 6.3 µg/m³; range across sensors: 3.0–13.0 µg/m³.
In Baltimore the air is good 🟢 AQI 41. Lower than three hours ago. ☀️ +14 °C · No precipitation · Wind 1 m/s
In Baltimore the air is good right now (approximate, US EPA scale). From 00:00 to 13:00 local time the city mean PM2.5 fell from 11.4 to 7.3 µg/m³.
The weather data do not point to a clear reason for this level.
Weather now: clear, 14°C, wind 1 m/s, humidity 44%. No major change in the wind is expected in the coming hours. By 00:00 the temperature will be about 6°C.
Written automatically at 13:00 local time (18:00 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
1 m/s
Wind, ESE
0 mm
Precipitation today
9 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 19:00–19:00 UTC-5): 9 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub.
62/100Moderate · An estimate of weather conditions · not a PM2.5 forecast
19°/2°
Index by time of day
96/100High
21°/4°
Index by time of day
98/100High
16°/10°
Index by time of day
87/100High
15°/11°
Index by time of day
82/100High
17°/8°
Index by time of day
41/100Moderate
7°/0°
Index by time of day
30/100Low
Forecast of conditions that trap pollution near the surface
14°
Clear. Feels like 12°C
1m/sWind from the ESE
3m/sWind gusts
Wind force: 1
Light wind is expected over the next few hours.
United States
Highest current reading: 13.0 µg/m³ (Essex (Maryland Department of the Environment)). Lowest: 3.0 µg/m³ (Edgewood (Maryland Department of the Environment)). The list shows every sensor, highest first.
Source: atmy.ai monitoring network
Sensors in the summary by network: Government stations — 4 sensors, AirGradient — 1 sensor.
Atmy shows the networks’ readings after the Data Hub’s quality check: test devices and sensors that fail it are left out.
534
New YorkUnited States
17SpokaneUnited States
16PortlandUnited States
14Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Daily mean PM2.5 of the city sensors, µg/m³
Click a day to see its date and value.
United States · City ranking · All pilot cities
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 19:00–19:00 UTC-5): 9 µg/m³ from 5 sensors that passed the quality check — the same value as in the Atmy Data Hub. No. 14 of 41 cities in United States and No. 348 of 811 worldwide, from the most polluted.
Right now in Baltimore, PM2.5 averages 7.3 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 5 sensors from Government stations, AirGradient, readings from 12:00–12:48 local time (17:00–17:48 UTC), summary prepared at 13:00 local time. Median: 6.3 µg/m³; range across sensors: 3.0–13.0 µg/m³.
The current level is “good” (US EPA scale, approximate). Air quality is satisfactory; no restrictions are recommended. This is the standard guidance of the scale, not medical advice.
Highest current reading: 13.0 µg/m³ (Essex (Maryland Department of the Environment)). Lowest: 3.0 µg/m³ (Edgewood (Maryland Department of the Environment)). The list shows every sensor, highest first.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms