Sindelfingen: air quality for the completed day
2 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 2 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Germany · The summary is refreshed every 15 minutes.
3 µg/m³ Low
November 19
The air is clean now
Sindelfingen
9°C
Partly cloudy
996
hPaAtmospheric
pressure
75%
Humidity
Sindelfingen, November 18, 2026: daily mean PM2.5 2 µg/m³ (6 sensors), level “Low” — as in the Atmy Data Hub. Now (19:00 local time): 3.1 µg/m³. Open methodology and data in JSON: Methodology and data sources · JSON
Right now in Sindelfingen, PM2.5 averages 3.1 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 6 sensors from Sensor.Community, readings from 18:42–18:44 local time (17:42–17:44 UTC), summary prepared at 19:00 local time. Median: 2.1 µg/m³; range across sensors: 0.9–8.1 µg/m³.
In Sindelfingen the air is good 🟢 AQI 17. Higher than three hours ago. ⛅ +9 °C · No precipitation · Wind 5 m/s
In Sindelfingen the air is good right now (approximate, US EPA scale). From 06:00 to 19:00 local time the city mean PM2.5 rose from 1.5 to 3.1 µg/m³.
The weather data do not point to a clear reason for this level.
Weather now: partly cloudy, 9°C, wind 5 m/s, humidity 75%. Precipitation is expected around 22:00; it may wash particles out.
Written automatically at 19:00 local time (18:00 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
5 m/s
Wind, SW
3.1 mm
Precipitation today
2 µg/m³ Low
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 2 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Monthly means of quality-checked sensors, as in the Data Hub trend; the current month is still incomplete, “-” means no data.
9/100Low · An estimate of weather conditions · not a PM2.5 forecast
10°/8°
Index by time of day
70/100High
9°/8°
Index by time of day
19/100Low
8°/1°
Index by time of day
85/100High
4°/-1°
Index by time of day
94/100High
4°/-1°
Index by time of day
81/100High
4°/-3°
Index by time of day
93/100High
Forecast of conditions that trap pollution near the surface
9°
Partly cloudy. Feels like 5°C
5m/sWind from the SW
11m/sWind gusts
Wind force: 3
Gusts up to 11 m/s are expected.
Germany
Highest current reading: 8.1 µg/m³ (SC #16944). Lowest: 0.9 µg/m³ (SC #94175). The list shows every sensor, highest first.
Source: atmy.ai monitoring network
Sensors in the summary by network: Sensor.Community — 6 sensors.
Atmy shows the networks’ readings after the Data Hub’s quality check: test devices and sensors that fail it are left out.
3,026
BerlinGermany
194HamburgGermany
167StuttgartGermany
167Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Daily mean PM2.5 of the city sensors, µg/m³
Click a day to see its date and value.
Germany · City ranking · All pilot cities
Daily mean PM2.5 on November 18, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 2 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub. No. 72 of 96 cities in Germany and No. 777 of 811 worldwide, from the most polluted.
Right now in Sindelfingen, PM2.5 averages 3.1 µg/m³ — “good” on the US EPA scale (approximate, from hourly readings). Mean of 6 sensors from Sensor.Community, readings from 18:42–18:44 local time (17:42–17:44 UTC), summary prepared at 19:00 local time. Median: 2.1 µg/m³; range across sensors: 0.9–8.1 µg/m³.
The current level is “good” (US EPA scale, approximate). Air quality is satisfactory; no restrictions are recommended. This is the standard guidance of the scale, not medical advice.
Highest current reading: 8.1 µg/m³ (SC #16944). Lowest: 0.9 µg/m³ (SC #94175). The list shows every sensor, highest first.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms