Hirschaid: air quality for the completed day
15 µg/m³ Moderate
Daily mean PM2.5 on November 10, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 15 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Germany · The summary is refreshed every 15 minutes.
November 11
The air is moderate now
Measured 21:00–22:58
Hirschaid
10°C
Cloudy
1001
hPaAtmospheric
pressure
97%
Humidity
Hirschaid, November 10, 2026: daily mean PM2.5 15 µg/m³ (6 sensors), level “Moderate” — as in the Atmy Data Hub. Now (23:00 local time): 20.7 µg/m³. Open methodology and data in JSON: Methodology and data sources · JSON
Right now in Hirschaid, PM2.5 averages 20.7 µg/m³ — “moderate” on the US EPA scale (approximate, from hourly readings). Mean of 6 sensors from Sensor.Community, AirGradient, Government stations, readings from 21:00–22:58 local time (20:00–21:58 UTC), summary prepared at 23:00 local time. Median: 19.8 µg/m³; range across sensors: 7.8–45.5 µg/m³.
In Hirschaid the air is moderate 🟡 AQI 73. Higher than three hours ago. ☁️ +10 °C · No precipitation · Wind 1 m/s
In Hirschaid the air is moderate right now (approximate, US EPA scale). From 10:00 to 23:00 local time the city mean PM2.5 rose from 9.3 to 20.7 µg/m³.
Light wind (1 m/s) in the evening or at night, as the air cools, possibly traps particles near the ground (a temperature inversion). High humidity (97%) possibly makes optical sensors read somewhat higher.
Weather now: cloudy, 10°C, wind 1 m/s, humidity 97%. No major change in the wind is expected in the coming hours.
Written automatically at 23:00 local time (22:00 UTC) from sensor measurements and the weather forecast. Values are approximate; hypotheses are marked.
1 m/s
Wind, SSW
7.4 mm
Precipitation today
15 µg/m³ Moderate
Daily mean PM2.5 on November 10, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 15 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub.
15/100Low · An estimate of weather conditions · not a PM2.5 forecast
10°/1°
Index by time of day
53/100Moderate
12°/5°
Index by time of day
41/100Moderate
7°/-1°
Index by time of day
56/100Moderate
7°/-1°
Index by time of day
56/100Moderate
9°/-2°
Index by time of day
60/100Moderate
9°/7°
Index by time of day
44/100Moderate
Forecast of conditions that trap pollution near the surface
10°
Cloudy. Feels like 10°C
1m/sWind from the SSW
2m/sWind gusts
Wind force: 1
Light wind is expected over the next few hours.
Germany
Highest current reading: 45.5 µg/m³ (Hirschaid, Ottostr.). Lowest: 7.8 µg/m³ (SC #11046). The list shows every sensor, highest first.
Source: atmy.ai monitoring network
Sensors in the summary by network: Sensor.Community — 4 sensors, AirGradient — 1 sensor, Government stations — 1 sensor.
Atmy shows the networks’ readings after the Data Hub’s quality check: test devices and sensors that fail it are left out.
2,731
BerlinGermany
203StuttgartGermany
188HamburgGermany
170Cities with the most sensors
All sensors on the map, by city as the map assigns them; the city’s values count only the sensors that pass the Data Hub’s quality check.
Daily mean PM2.5 of the city sensors, µg/m³
Click a day to see its date and value.
Germany · City ranking · All pilot cities
Daily mean PM2.5 on November 10, 2026 (00:00–24:00 UTC = 01:00–01:00 UTC+1): 15 µg/m³ from 6 sensors that passed the quality check — the same value as in the Atmy Data Hub.
Right now in Hirschaid, PM2.5 averages 20.7 µg/m³ — “moderate” on the US EPA scale (approximate, from hourly readings). Mean of 6 sensors from Sensor.Community, AirGradient, Government stations, readings from 21:00–22:58 local time (20:00–21:58 UTC), summary prepared at 23:00 local time. Median: 19.8 µg/m³; range across sensors: 7.8–45.5 µg/m³.
The current level is “moderate” (US EPA scale, approximate). Unusually sensitive people should consider reducing prolonged or heavy exertion outdoors. This is the standard guidance of the scale, not medical advice.
Highest current reading: 45.5 µg/m³ (Hirschaid, Ottostr.). Lowest: 7.8 µg/m³ (SC #11046). The list shows every sensor, highest first.
From Atmy sensors and connected public networks (citizen, experimental and government monitors), aggregated by Atmy. Values are approximate; see the methodology.
The summary is rebuilt every 15 minutes from the latest reading of each sensor, each no older than one hour.
The daily value is the Data Hub’s: the mean of the city’s sensors that passed the nightly quality check, each with at least 12 valid hours, and only with sensors at four places 500 m apart; days are UTC.
“Now” uses the same sensors and rule: the mean of their latest readings, each at most 60 minutes old, shown only with sensors at four places 500 m apart reporting.
Source: public Atmy monitoring data. Methodology and data sources · Data terms